Search by Blog
Read by Category

Your healing journey continues beyond this blog

Find the right products for better recovery at online store
Cart Image

Climate change refers to the change in the average surface temperature on Earth. The average temp. on our planet has been 15˚C, but the past few years have seen drastic variations in the same, both up and down. Scientists say that temperatures are rising at a faster pace than ever.

There may be several reasons for climate change as per scientific consensus, primarily being the overexploitation of fossil fuels by humans and deforestation. This results in the release of carbon dioxide & other greenhouse gases, such as methane and nitrous oxide, into the atmosphere.

These gases remain trapped in the atmosphere and impose various negative effects on the ecosystem. It may include a rise in the sea level, extreme weather conditions, melting polar ice, floods, droughts causing wildfires.

Do you know that since the industrial revolution began in 1750, the levels of CO2 have risen by 30%?

Climate Change vs. Global Warming

Although we do use the words, “Climate Change” and “Global Warming” interchangeably, these are two different phenomena. While Climate Change refers to the long-term changes in the average weather conditions/climate, Global Warming is the phenomenon of heating of the planet’s climate system.

As per NASA, Global Warming is most commonly measured as the average increase in Earth’s global surface temperature and Climate Change refers to the average weather patterns that have come to define Earth’s local, regional and global climates.

Global Warming is mainly attributed to human-produced temperature rise while Climate Change maybe because of the natural processes like cyclical ocean patterns, volcanic activities, variations in the Sun’s energy output, changes in Earth’s orbit).

Some data from the World Meteorological Organization (WMO):

1. The world’s 20 warmest years have been recorded in the past 22 years.

2. The years between 2015-18 have been the top four warmest.

3. The average sea level rise has been by 3.6mm per year between 2005 and 2015.

4. Melting ice is attributed to be the main reason for rising sea levels.

5. Most glaciers in temperate regions of the world, whether the West Antarctic Ice Sheet, East Antarctica, or the Greenland Ice Sheet, are retreating.

6. Satellite records depict a dramatic decline in Arctic sea-ice since 1979.

Following are the various anthropogenic causes of climate change:

Greenhouse Effect:
It may be caused by the burning of fossil fuels, construction, livestock production, excessive use of fertilizers, industrial activities increase the greenhouse effect by increasing the temp.

Deforestation:
Plants & trees perform photosynthesis and absorb CO2 while returning O2 to the atmosphere. Heavy deforestation has opposite effects on the ecosystem as it releases sequestered carbon into the air. Forest degradation contributes up to 20 percent of global carbon emissions.

Destruction of Marine Ecosystem:
Oceans act as carbon sinks and have the ability to absorb up to 50% of CO2 With the greenhouse effect, the increasing CO2 levels acidify the ocean, causing the death of marine flora & fauna.

Population Increase:
An increase in the global population level speeds up the increase in greenhouse gas emissions from all production processes.

Earth Heating Up by two degrees.  Is it significant?

Over a period of the last few years, the temperature on our planet has risen by two degrees Fahrenheit. Although the number may sound low it’s actually impactful. A mere 2˚ change in temperature has melted our glaciers, rising the seawater levels, global warming, floods, droughts, etc.

We @DattMediproducts understand that apart from the above-mentioned causes other human activities like fertilizer use, certain industrial processes releasing fluorinated gases, also generate air pollution & greenhouse effect.

Excessive agriculture and road construction also lead to local warming & cooling.  Follow our next upcoming blog to know how climate change is impacting our lives and can we tackle the situation.

Visit www.dattmedi.com for more infomation.
Share:
Recent Blogs
Ensuring Safe Wound Care Practices

Wound care is a critical aspect of healthcare that demands meticulous attention to patient safety. Proper wound management not only accelerates healing but also significantly reduces the risk of complications. In this blog, we will explore the importance of patient safety in wound care, emphasizing best practices, infection control, and risk minimization.

Importance of Patient Safety in Wound Care

Patient safety in wound care involves implementing measures to prevent harm and ensure safety during the treatment process. This includes avoiding infections, minimizing pain, and ensuring that wounds heal properly. A safe wound care environment is essential for patient well-being and can prevent further medical complications.

Best Practices in Wound Care

Assessment and Planning:

  • Thorough Assessment: Begin with a comprehensive assessment of the wound, considering factors like wound type, exudate characteristics, comorbid conditions, pain level, periwound condition, size, depth, and location. Understand the patient’s overall health, including any underlying conditions that may affect healing.
  • Individualized Care Plan: Develop a tailored care plan that addresses the specific needs of the patient and the wound. Regularly update the plan based on the wound’s progress.

Hygiene and Infection Control:

  • Clean Environment: Ensure the wound care area is clean and sanitized. All reusable wound care equipment and supplies should be sterilized before use. Fresh dressings and bandages should be cut with clean apparatus.
  • Hand Hygiene: Proper hand hygiene is crucial. Perform hand hygiene using alcohol-based rub or soap and water immediately before and after the wound care procedure. The use of gloves and other personal protective equipment (PPE) is mandatory to prevent contamination.

Wound Cleaning and Dressing:

  • Gentle Cleaning: Clean the wound gently with saline solution or appropriate antiseptic solutions. Avoid harsh scrubbing which can damage tissue and impede healing.
  • Appropriate Dressings: Use the right type of dressing for the wound such as hydrocolloid dressings for pressure ulcers or alginate dressings for heavily exuding wounds. Change dressings as per the doctor’s care plan to maintain a clean environment.

Patient Education and Involvement:

  • Educate Patients: Instruct patients and caregivers on proper wound care techniques, signs of infection, and when to seek medical advice. Patient education enhances compliance and promotes faster healing.

Infection Control:

Preventing infections is a cornerstone of safe wound care. Infections can complicate wound healing and lead to serious health issues. Implementing stringent infection control measures is essential.

  • Sterile Techniques: Always use sterile wound care equipment and supplies when handling wounds. This includes using sterile dressings, tools, and gloves.
  • Regular Monitoring: Monitor the wound for signs of infection, such as increased redness, swelling, warmth, or discharge. Early detection and intervention can prevent severe complications.
  • Antibiotic Use: Use antibiotics judiciously. Overuse or not finishing the full course of the antibiotic can lead to antibiotic resistance, making infections harder to treat.

Minimizing Risks:

Risk minimization in wound care involves anticipating potential problems and taking steps to avoid them.

  • Nutrition and Hydration: Ensure patients have adequate nutrition and hydration. A proper diet supports tissue repair and overall health.
  • Pressure Ulcer Prevention: For bedridden patients, repositioning is crucial to prevent pressure ulcers. Use pressure-relieving devices like specialized mattresses or cushions.
  • Moisture Control: Keep the wound environment moist but not wet. Moisture balance prevents the wound from drying out or becoming too wet, both of which can impede healing.

Ensuring safe wound care practices is vital for promoting patient recovery and preventing complications. By adhering to best practices, maintaining strict infection control, and actively involving patients in their care, healthcare professionals can create a safe and effective wound care environment. As we strive for excellence in wound care, let us remember that patient safety is at the heart of healing.

Adhering to international standards like ISO 9001:2015 and ISO 13485:2016 while manufacturing wound care products can further enhance the quality of wound care practices, ensuring that products meet rigorous safety and quality benchmarks. Let us commit to delivering next-gen healing solutions with a steadfast focus on safety and patient well-being.

Advantages of Using Velfix®࿯ T+Pad for Post Surgical Wounds

In the field of post-surgical wound care, innovation plays a crucial role in ensuring optimal healing outcomes and patient comfort. Introducing Velfix® -T+Pad, a groundbreaking solution that redefines the standards of wound dressings. Meticulously designed and crafted, Velfix® -T+Pad stands at the forefront of advanced wound care technology, offering not only healing but also unparalleled comfort and convenience.

Waterproof and Bacterial Barrier Properties:

Among the essential features of wound dressings, waterproofing and bacterial barrier stand out. Velfix® -T+Pad not only meets these requirements but surpasses them. Its impermeable yet breathable film forms a protective shield against water and bacteria, safeguarding the wound from external threats and fostering a hygienic healing environment.

Benefits of Continuous Visual Monitoring: 

The advantage of transparent film dressings is the ability to visually monitor the wound without removing the dressing. This allows healthcare providers to detect early signs of infection: clinicians can quickly spot signs of infection, excessive drainage, or other complications, facilitating prompt intervention. It also aids in exudate management : ensuring that the wound exudate is being effectively absorbed and does not pose a risk to the healing process.

Conforming to Body Contours:

Comfort is paramount, especially in areas prone to movement or swelling. Velfix® -T+Pad addresses this need adeptly. Its flexible design seamlessly conforms to the body’s contours, providing a snug fit without compromising comfort. Whether it’s a joint, a curve, or a crease, Velfix® -T+Pad stays in place, ensuring uninterrupted healing.

Effective Evaporation of Moisture:

Moisture management is critical for wound healing, and Velfix® -T+Pad excels in this aspect. Thanks to its innovative adhesive pattern, it facilitates efficient moisture evaporation from the wound bed. This not only keeps the area dry but also prevents maceration, creating optimal conditions for healing.

Reducing Pain Upon Removal:

Dressing changes can be painful, but Velfix® -T+Pad aims to alleviate this discomfort. Featuring a non-adherent pad, it minimizes trauma upon removal, reducing pain and discomfort for the patient. With Velfix® -T+Pad, dressing changes become a smoother, more tolerable process, enhancing the overall patient experience.

In the realm of post-surgical wound care, excellence is imperative. With its innovative design and advanced technology, Velfix® -T+Pad sets a new standard for wound dressings, offering a comprehensive solution that prioritizes healing, comfort, and convenience. 

From its waterproof and bacterial barrier properties to its transparent film for easy monitoring, Velfix® -T+Pad epitomizes cutting-edge wound care. Trust in Velfix® -T+Pad to deliver not only healing but also peace of mind, ensuring a smoother, swiffer path to recovery for patients worldwide.

×