Search by Blog
Read by Category

Your healing journey continues beyond this blog

Find the right products for better recovery at online store
Cart Image
Iron in Pregnant Woman Deficiency & Causes
Iron in Pregnant Woman Deficiency & Causes

Iron deficiency is the leading nutritional deficiency around the world, with a huge impact on global health. As per the World Health Organization (WHO), it is estimated that 41.8% of pregnant women worldwide are aneamic.

At least half of this anemia burden is assumed to be due to iron deficiency. Iron Deficiency Anaemia (IDA) is now a raging issue in developing nations, that needs to be acted upon immediately.


Iron has multiple functions in our body:

Carries oxygen
Creates energy and assists in cell metabolism
Helps in supporting a healthy immune system, thus preventing infection
Assists with brain development
Enhances cognition
Helps in concentration and mental performance

Iron also impacts the social behaviour of toddlers and children. Iron deficiency in our body gradually leads to aneamia and low levels of iron in the red blood cells.

Let’s find out why Iron is important during pregnancy:
Iron forms Hemeoglobin (Heme + Globin), a protein which carries oxygen and transports it to the cells, tissues, and organs in our body. Most of the iron in our body is found in Hemoglobin present in RBCs.

A pregnant woman needs twice the amount of iron as needed by a non-pregnant woman.  This is because a mother’s body needs iron to make blood, to supply to the growing fetus (baby). If the mother’s body lacks enough iron stores or doesn’t get enough iron through her diet, there is an increased risk of developing IRON DEFICIENCY ANEMIA (IDA). In this case, a mother will not have enough healthy Red Blood Cells (RBCs) to carry adequate oxygen to the fetus.

How to spot Iron Deficiency:
There are number of symptoms to spot Iron Deficiency and some of them are:
o   Fatigue/ Lack of energy
o   Weakness
o   Pale or yellowish skin
o   Irregular heartbeat
o   Shortness of breath
o   Dizziness or Lightheadedness
o   Chest pain
o   Cold hands and feet
o   Headache

IDA symptoms are often overlooked and clubbed as general pregnancy symptoms. For this reason, a pregnant lady needs to have blood screening tests at regular intervals
(as recommended by the physician). As per WHO Guidelines, the Hb threshold in 1st & 3rd trimester for diagnosing anemia is 11.0 g/dL; in the 2nd trimester, the threshold is 10.5 g/dL.

Being mindful of your diet when pregnant is the first step towards avoiding iron deficiency. If, for whatever reason, you have a restricted diet, or are struggling to eat due to morning sickness, it is recommended to talk to your Doctor or a dietitian early on, so they can advise you on any supplement or special foods you may need to stay healthy.

Focusing on iron-rich foods is important, and especially the “haem” type of iron that is found in red meat, chicken liver, and fish. This type of iron is absorbed much more readily from the gut than the “non-haem” iron found in vegetables, fruit, legumes, cereals, and eggs.

However, a woman who has adequate iron levels need not take iron supplements as there will be no additional health benefits for them or their child. Dietary iron is sufficient for them. Too much iron can also be unhealthy. Few of the side effects due to higher dose iron supplements may include, in particular, gastrointestinal (stomach and bowel) problems like constipation, nausea, vomiting, and diarrhea.

How can iron deficiency affect you and your baby?
Let’s check out some of the consequences of iron deficiency during pregnancy.
Increases your risk of premature birth (Preterm birth)
Low birth weight
Puerperal sepsis
Postpartum depression
Weakened mother’s immune system
Some studies also show an increased risk of infant death immediately before or after birth.

Maternal iron deficiency and iron deficiency anemia during pregnancy is one of the leading causes of anemia in infants and young children. This may be due to the lower levels of iron stores persisting for up to a year. Breastfeeding cannot be protective if the mother is iron deficient. Iron levels should be carefully monitored and supplemented in high-risk infants as the iron levels in breast milk fall as lactation progresses over time.

Anemia can be asymptomatic also. Hence, it should be diagnosed and treated promptly to avoid long-term consequences. IDA in infants and young children can lead to development difficulties involving cognitive functioning, socio-emotional, and adaptive functions. Delays in language and motor development have also been documented. Iron has direct roles in neural metabolism and functioning and IDA can lead to changes in neural metabolism resulting in defects in neurotransmitter function and myelination.

Pregnancy is a time when your body is going through a lot of changes, so it’s understandable to feel tired or lethargic. You should visit your doctor and get your test done regularly to safeguard your and your babies health. One of the best ways to ensure you get enough iron is to eat a diet that is packed with green, leafy vegetables.

Tip: Taking your iron tablet along with an acidic drink, for example, orange juice, will help with faster and better absorption of the iron supplement

Visit www.dattmedi.com for more infomation.
Share:
Recent Blogs
Comparing Orthopedic Casts

When it comes to managing fractures, the choice of cast material can make a significant difference in a patient’s recovery experience. Orthopaedic casts are essential in ensuring that broken bones heal correctly by providing the necessary immobilization. Two popular options in the medical field are Fiberglass and Plaster of Paris (POP) bandages. But how do they compare? Let’s dive into the details.

A. Material Composition: The Building Blocks

The fundamental difference between these two types of bandages begins with what they are made of:

  • Fiberglass is a synthetic material, made from plastic fibers coated with a resin. It’s known for being lightweight and is often available in various colors, which can add a bit of personality to an otherwise clinical experience.
  • Plaster of Paris is made from a fine white powder called gypsum. When mixed with water, it forms a thick paste that hardens as it dries.

B. Application Process: Ease vs. Skill

Applying these bandages requires different techniques:
  • Fiberglass bandages are dipped in water, applied to the injury, and begin hardening almost immediately, which allows for quick and efficient application. This makes it easier for healthcare providers to mold it perfectly to the patient’s body.
  • Plaster of Paris bandages need to be soaked in water and take longer to set. While they require more skill to apply, they offer a smooth finish that many patients find comfortable.

C. Durability and Strength: Which Lasts Longer?

When considering durability:
  • Fiberglass is the champion of strength. Its resistance to wear and tear makes it ideal for active individuals or cases requiring long-term immobilization.
  • Plaster of Paris is less durable, with a tendency to chip over time, making it better suited for short-term casts or initial treatments.

D. Comfort and Breathability: Feeling at Ease

Comfort is a top priority for patients who need to wear a cast for an extended period:
  • Fiberglass is lighter and less bulky, which adds to the patient’s comfort. However, it can sometimes be less breathable, leading to potential discomfort in hot or humid climates.
  • Plaster of Paris is bulkier and heavier, but it’s smooth finish can be more comfortable for some, allowing the skin to breathe better.

E. Setting Time and Ease of Use: Quick vs. Steady

The time it takes for a cast to set is crucial:
  • Fiberglass sets in just a few minutes, enabling patients to resume limited activities sooner.
  • Plaster of Paris takes much longer, often up to 15 minutes, which can be a disadvantage when immediate mobility is needed.

F. Water Resistance and Hygiene: Keeping It Clean

Hygiene is another critical factor:
  • Fiberglass is water-resistant, making it easier to maintain and less likely to harbour bacteria.
  • Plaster of Paris does not resist water and can easily disintegrate if exposed to moisture, requiring patients to take extra precautions to keep it dry.

G. Cost and Accessibility: Budget Matters

Cost and availability can influence the choice:
  • Fiberglass is typically more expensive and may not be available in all healthcare settings.
  • Plaster of Paris is more affordable and widely accessible, making it the go-to option in many clinics and hospitals, especially in resource-limited settings.

H. Environmental Impact: Think Green

With growing awareness about environmental impact:
  • Fiberglass, being a synthetic material, is less eco-friendly and can pose disposal challenges.
  • Plaster of Paris is derived from natural materials and is more environmentally friendly, though proper disposal is still necessary.

I. Clinical Applications: The Right Cast for the Right Case

  • Fiberglass is often recommended for long-term use and in cases where the patient is likely to remain active.
  • Plaster of Paris is ideal for short-term immobilization or initial treatments, particularly when budget constraints are a concern.

Making the Right Choice : Choosing between Fiberglass and Plaster of Paris bandages depends on several factors, including the patient’s lifestyle, the duration of immobilization, and budget.

Fiberglass is generally favoured for its durability and water resistance, while Plaster of Paris remains a trusted option for initial and short-term care due to its affordability and ease of use.

For more insights and to explore our range of orthopaedic casting products, visit our website: Velcast™ – Orthopaedic Fiberglass Casting Tape, Osteopop™ – Plaster of Paris Bandage and Velpop® – Plaster of Paris Bandage. Discover the best solutions for your orthopaedic needs today!

Ensuring Safe Wound Care Practices

Wound care is a critical aspect of healthcare that demands meticulous attention to patient safety. Proper wound management not only accelerates healing but also significantly reduces the risk of complications. In this blog, we will explore the importance of patient safety in wound care, emphasizing best practices, infection control, and risk minimization.

Importance of Patient Safety in Wound Care

Patient safety in wound care involves implementing measures to prevent harm and ensure safety during the treatment process. This includes avoiding infections, minimizing pain, and ensuring that wounds heal properly. A safe wound care environment is essential for patient well-being and can prevent further medical complications.

Best Practices in Wound Care

Assessment and Planning:

  • Thorough Assessment: Begin with a comprehensive assessment of the wound, considering factors like wound type, exudate characteristics, comorbid conditions, pain level, periwound condition, size, depth, and location. Understand the patient’s overall health, including any underlying conditions that may affect healing.
  • Individualized Care Plan: Develop a tailored care plan that addresses the specific needs of the patient and the wound. Regularly update the plan based on the wound’s progress.

Hygiene and Infection Control:

  • Clean Environment: Ensure the wound care area is clean and sanitized. All reusable wound care equipment and supplies should be sterilized before use. Fresh dressings and bandages should be cut with clean apparatus.
  • Hand Hygiene: Proper hand hygiene is crucial. Perform hand hygiene using alcohol-based rub or soap and water immediately before and after the wound care procedure. The use of gloves and other personal protective equipment (PPE) is mandatory to prevent contamination.

Wound Cleaning and Dressing:

  • Gentle Cleaning: Clean the wound gently with saline solution or appropriate antiseptic solutions. Avoid harsh scrubbing which can damage tissue and impede healing.
  • Appropriate Dressings: Use the right type of dressing for the wound such as hydrocolloid dressings for pressure ulcers or alginate dressings for heavily exuding wounds. Change dressings as per the doctor’s care plan to maintain a clean environment.

Patient Education and Involvement:

  • Educate Patients: Instruct patients and caregivers on proper wound care techniques, signs of infection, and when to seek medical advice. Patient education enhances compliance and promotes faster healing.

Infection Control:

Preventing infections is a cornerstone of safe wound care. Infections can complicate wound healing and lead to serious health issues. Implementing stringent infection control measures is essential.

  • Sterile Techniques: Always use sterile wound care equipment and supplies when handling wounds. This includes using sterile dressings, tools, and gloves.
  • Regular Monitoring: Monitor the wound for signs of infection, such as increased redness, swelling, warmth, or discharge. Early detection and intervention can prevent severe complications.
  • Antibiotic Use: Use antibiotics judiciously. Overuse or not finishing the full course of the antibiotic can lead to antibiotic resistance, making infections harder to treat.

Minimizing Risks:

Risk minimization in wound care involves anticipating potential problems and taking steps to avoid them.

  • Nutrition and Hydration: Ensure patients have adequate nutrition and hydration. A proper diet supports tissue repair and overall health.
  • Pressure Ulcer Prevention: For bedridden patients, repositioning is crucial to prevent pressure ulcers. Use pressure-relieving devices like specialized mattresses or cushions.
  • Moisture Control: Keep the wound environment moist but not wet. Moisture balance prevents the wound from drying out or becoming too wet, both of which can impede healing.

Ensuring safe wound care practices is vital for promoting patient recovery and preventing complications. By adhering to best practices, maintaining strict infection control, and actively involving patients in their care, healthcare professionals can create a safe and effective wound care environment. As we strive for excellence in wound care, let us remember that patient safety is at the heart of healing.

Adhering to international standards like ISO 9001:2015 and ISO 13485:2016 while manufacturing wound care products can further enhance the quality of wound care practices, ensuring that products meet rigorous safety and quality benchmarks. Let us commit to delivering next-gen healing solutions with a steadfast focus on safety and patient well-being.

×