Search by Blog
Read by Category

Your healing journey continues beyond this blog

Find the right products for better recovery at online store
Cart Image
Wound Healing & Care

Minor scratches, scrapes, and cuts are a part of our everyday life. When our skin is injured, our body works to heal the wound. No two wounds are the same and thus different wounds require different attention and care.

Healing is delayed when wounds become infected with harmful microorganisms. If left untreated, there is a risk of the infection spreading to other body parts.

Dermatologists recommend the following guidelines to care for minor cuts and scrapes:

Wash your Hands: The first step in the First Aid process is to wash your hands with soap and water to avoid any infection.

Stop the Bleeding: Applying a gentle pressure with a clean cloth or gauze. Elevating the wound also helps to stop the bleeding.

Clean the Wound: Cleaning the wound is a crucial step to remove dirt and debris. Rinse the wound under running water and wash around the wound with
water and soap. But make sure none of the soap comes in contact with the wound.

Apply petroleum jelly or an Antibiotic: This step helps to keep the wound area moist and prevents the spread of dirt and microorganisms.

Cover the Wound with Sterile Dressings: Covering the wound with a sterile dressing or gauze helps to keep it clean and protects it from outside contaminants. These dressings should be changed regularly to keep the wound clean.

Look for any signs of Infection: A wound that isn’t healing normally may be dark in color or have red streaks and increasing pain. If the wound isn’t healing it is advisable to go to a doctor to get it checked up.

Tip- Make sure you get a tetanus shot if your wound is from a dirty or rusty object.

Signs of infection and when to see a clinician*

Initially, some mild redness directly around the wound is a normal part of healing, but seek medical care if there is any of the following:
– Redness spreading out or “streaking” from the wound
– Increased pain or swelling of the wound
– Difficulty moving the affected area
– Pus or odorous wound drainage
– Warmth around the wound site
– Fever higher than 100.4 degrees
– Any concerns about poor healing, large or gaping wounds, bite injuries, etc.

Wound Healing Complications
Infection: Infection is the most common cause of delayed wound healing. A localized infection, if not controlled, can eventually spread to the bloodstream (systemic infection) resulting in sepsis, leading to multiple organs dysfunction, and subsequent life- and limb-threatening infection.

Osteomyelitis: Infections can travel through the bloodstream or by spreading from nearby tissue. When the infection reaches the bone it is referred to as Osteomyelitis. 20% to 60% of the patients suffering from Diabetic Foot Ulcers have underlying Osteomyelitis that increases their risk of lower extremity amputation.

Tissue Necrosis & Gangrene: Ulceration and Gangrene may occur in the lower extremities due to poor blood supply because of peripheral vascular diseases. A wet and draining necrotic tissue may result in hospitalization and amputation.

Peri-wound Maceration: Chronic wound exudates often consist of substances, which damage the skin surrounding the wound area. The damaged skin looks pale/ white and wrinkled. This is called maceration and affects the skin in the peri-wound area. It can prevent the wound from closing and healing.

EDEMA: Edema is the excess fluid trapped in the body’s tissue that leads to swelling. Mild edema dissipates by itself, but severe edema may slow the healing process because it compresses the blood vessels in the affected area leading to further complications like pain, stiffness, motility issues, decreased microcirculation, increase the risk of infection, peri-wound skin damage etc.

Apart from these, there may be many other complications too. Comorbid conditions such as malignancies or diabetes, also need to be managed. The underlying causes resulting in the poor healing of chronic wounds may also include malnutrition, arterial insufficiency, infection, age, obesity, the weak immune system to name a few.

The risk factors and complications of a chronic non-healing wound should be identified and appropriately managed by a clinician. The complications deteriorate the condition and increase the cost to the patient both financially and personally. It affects a patient’s quality of life and may contribute significantly to their morbidity and mortality.

An early detection and management of the risks and taking appropriate treatment by consulting a professional expert/clinician can help to mitigate further complications and achieve a positive outcome by better wound healing.

We @ Datt Mediproducts Pvt. Ltd. manufacture a range of wound healing products with impeccable quality by following international standards.

Visit www.dattmedi.com for more infomation.
Share:
Recent Blogs
Comparing Orthopedic Casts

When it comes to managing fractures, the choice of cast material can make a significant difference in a patient’s recovery experience. Orthopaedic casts are essential in ensuring that broken bones heal correctly by providing the necessary immobilization. Two popular options in the medical field are Fiberglass and Plaster of Paris (POP) bandages. But how do they compare? Let’s dive into the details.

A. Material Composition: The Building Blocks

The fundamental difference between these two types of bandages begins with what they are made of:

  • Fiberglass is a synthetic material, made from plastic fibers coated with a resin. It’s known for being lightweight and is often available in various colors, which can add a bit of personality to an otherwise clinical experience.
  • Plaster of Paris is made from a fine white powder called gypsum. When mixed with water, it forms a thick paste that hardens as it dries.

B. Application Process: Ease vs. Skill

Applying these bandages requires different techniques:
  • Fiberglass bandages are dipped in water, applied to the injury, and begin hardening almost immediately, which allows for quick and efficient application. This makes it easier for healthcare providers to mold it perfectly to the patient’s body.
  • Plaster of Paris bandages need to be soaked in water and take longer to set. While they require more skill to apply, they offer a smooth finish that many patients find comfortable.

C. Durability and Strength: Which Lasts Longer?

When considering durability:
  • Fiberglass is the champion of strength. Its resistance to wear and tear makes it ideal for active individuals or cases requiring long-term immobilization.
  • Plaster of Paris is less durable, with a tendency to chip over time, making it better suited for short-term casts or initial treatments.

D. Comfort and Breathability: Feeling at Ease

Comfort is a top priority for patients who need to wear a cast for an extended period:
  • Fiberglass is lighter and less bulky, which adds to the patient’s comfort. However, it can sometimes be less breathable, leading to potential discomfort in hot or humid climates.
  • Plaster of Paris is bulkier and heavier, but it’s smooth finish can be more comfortable for some, allowing the skin to breathe better.

E. Setting Time and Ease of Use: Quick vs. Steady

The time it takes for a cast to set is crucial:
  • Fiberglass sets in just a few minutes, enabling patients to resume limited activities sooner.
  • Plaster of Paris takes much longer, often up to 15 minutes, which can be a disadvantage when immediate mobility is needed.

F. Water Resistance and Hygiene: Keeping It Clean

Hygiene is another critical factor:
  • Fiberglass is water-resistant, making it easier to maintain and less likely to harbour bacteria.
  • Plaster of Paris does not resist water and can easily disintegrate if exposed to moisture, requiring patients to take extra precautions to keep it dry.

G. Cost and Accessibility: Budget Matters

Cost and availability can influence the choice:
  • Fiberglass is typically more expensive and may not be available in all healthcare settings.
  • Plaster of Paris is more affordable and widely accessible, making it the go-to option in many clinics and hospitals, especially in resource-limited settings.

H. Environmental Impact: Think Green

With growing awareness about environmental impact:
  • Fiberglass, being a synthetic material, is less eco-friendly and can pose disposal challenges.
  • Plaster of Paris is derived from natural materials and is more environmentally friendly, though proper disposal is still necessary.

I. Clinical Applications: The Right Cast for the Right Case

  • Fiberglass is often recommended for long-term use and in cases where the patient is likely to remain active.
  • Plaster of Paris is ideal for short-term immobilization or initial treatments, particularly when budget constraints are a concern.

Making the Right Choice : Choosing between Fiberglass and Plaster of Paris bandages depends on several factors, including the patient’s lifestyle, the duration of immobilization, and budget.

Fiberglass is generally favoured for its durability and water resistance, while Plaster of Paris remains a trusted option for initial and short-term care due to its affordability and ease of use.

For more insights and to explore our range of orthopaedic casting products, visit our website: Velcast™ – Orthopaedic Fiberglass Casting Tape, Osteopop™ – Plaster of Paris Bandage and Velpop® – Plaster of Paris Bandage. Discover the best solutions for your orthopaedic needs today!

Ensuring Safe Wound Care Practices

Wound care is a critical aspect of healthcare that demands meticulous attention to patient safety. Proper wound management not only accelerates healing but also significantly reduces the risk of complications. In this blog, we will explore the importance of patient safety in wound care, emphasizing best practices, infection control, and risk minimization.

Importance of Patient Safety in Wound Care

Patient safety in wound care involves implementing measures to prevent harm and ensure safety during the treatment process. This includes avoiding infections, minimizing pain, and ensuring that wounds heal properly. A safe wound care environment is essential for patient well-being and can prevent further medical complications.

Best Practices in Wound Care

Assessment and Planning:

  • Thorough Assessment: Begin with a comprehensive assessment of the wound, considering factors like wound type, exudate characteristics, comorbid conditions, pain level, periwound condition, size, depth, and location. Understand the patient’s overall health, including any underlying conditions that may affect healing.
  • Individualized Care Plan: Develop a tailored care plan that addresses the specific needs of the patient and the wound. Regularly update the plan based on the wound’s progress.

Hygiene and Infection Control:

  • Clean Environment: Ensure the wound care area is clean and sanitized. All reusable wound care equipment and supplies should be sterilized before use. Fresh dressings and bandages should be cut with clean apparatus.
  • Hand Hygiene: Proper hand hygiene is crucial. Perform hand hygiene using alcohol-based rub or soap and water immediately before and after the wound care procedure. The use of gloves and other personal protective equipment (PPE) is mandatory to prevent contamination.

Wound Cleaning and Dressing:

  • Gentle Cleaning: Clean the wound gently with saline solution or appropriate antiseptic solutions. Avoid harsh scrubbing which can damage tissue and impede healing.
  • Appropriate Dressings: Use the right type of dressing for the wound such as hydrocolloid dressings for pressure ulcers or alginate dressings for heavily exuding wounds. Change dressings as per the doctor’s care plan to maintain a clean environment.

Patient Education and Involvement:

  • Educate Patients: Instruct patients and caregivers on proper wound care techniques, signs of infection, and when to seek medical advice. Patient education enhances compliance and promotes faster healing.

Infection Control:

Preventing infections is a cornerstone of safe wound care. Infections can complicate wound healing and lead to serious health issues. Implementing stringent infection control measures is essential.

  • Sterile Techniques: Always use sterile wound care equipment and supplies when handling wounds. This includes using sterile dressings, tools, and gloves.
  • Regular Monitoring: Monitor the wound for signs of infection, such as increased redness, swelling, warmth, or discharge. Early detection and intervention can prevent severe complications.
  • Antibiotic Use: Use antibiotics judiciously. Overuse or not finishing the full course of the antibiotic can lead to antibiotic resistance, making infections harder to treat.

Minimizing Risks:

Risk minimization in wound care involves anticipating potential problems and taking steps to avoid them.

  • Nutrition and Hydration: Ensure patients have adequate nutrition and hydration. A proper diet supports tissue repair and overall health.
  • Pressure Ulcer Prevention: For bedridden patients, repositioning is crucial to prevent pressure ulcers. Use pressure-relieving devices like specialized mattresses or cushions.
  • Moisture Control: Keep the wound environment moist but not wet. Moisture balance prevents the wound from drying out or becoming too wet, both of which can impede healing.

Ensuring safe wound care practices is vital for promoting patient recovery and preventing complications. By adhering to best practices, maintaining strict infection control, and actively involving patients in their care, healthcare professionals can create a safe and effective wound care environment. As we strive for excellence in wound care, let us remember that patient safety is at the heart of healing.

Adhering to international standards like ISO 9001:2015 and ISO 13485:2016 while manufacturing wound care products can further enhance the quality of wound care practices, ensuring that products meet rigorous safety and quality benchmarks. Let us commit to delivering next-gen healing solutions with a steadfast focus on safety and patient well-being.

×