Search by Blog
Read by Category

Your healing journey continues beyond this blog

Find the right products for better recovery at online store
Cart Image
Lung Cancer Not just a Smoker’s Disease

Did you know that lung cancer is responsible for the highest number of deaths in India? This number even exceeds the deaths caused by other types of cancers including ovarian, breast, prostate and colon, put together.

FACT: 50% of the patients suffering from lung cancer had never smoked.

Lung Cancer, which originates in one or both the lungs, is defined as an uncontrolled growth of abnormal cells in the lungs. These abnormal cells can grow into the tumorous form and interfere with the normal functioning of the lungs.

As per the WHO study, 70% of lung cancer occurs in patients aged 65 years or above, while the rate of lung cancer patients is just 3% in people aged 45 years or below. The main reason for lung cancer is smoking followed by prolonged exposure to toxic and polluted air, asbestos fibers and radon gas.

Types of Lung Cancer

Small Cell Carcinoma:

  • This is the fast-growing type of lung cancer and occurs mostly in smokers.
  • The tumorous growth first starts in the bronchi (the breathing tubes) and then spreads throughout the body (metastasizing).
  • Symptoms include cough, chest pain, phlegm, or shortness of breath.

Non-Small Cell Lung Carcinoma:

  • NSCLC affects both smokers and non-smokers. This is the most common type of lung cancer accounting for 85% of all lung cancers.
  • NSCLC is sub-classified into Adenocarcinoma, Large Cell Carcinoma and Squamous cell carcinoma, based upon the types of cells the tumor consists of.
  • NSCLC is often asymptomatic until the cancer reaches a more advanced stage.
  • Symptoms include chronic cough, weight loss, fatigue, chest or back pain, shortness of breath or coughing up blood.

Complications of Lung Cancer

  • Shortness of breath: As the cancer cells grow, they block the airways making it harder for the lungs to expand fully to inhale and thus causing shortness of breath.
  • Coughing up blood: The cancer cells may cause bleeding in the airways, leading to the patient coughing up blood, which is called Hemoptysis.
  • Pain: In advance stages, the lung cancer metastasizes to other body parts like the bones that cause pain.
  • Fluid in the chest (pleural effusion): As the tumor cells grow, the fluid gets accumulated in the pleural space (chest cavity) which causes shortness of breath.
  • Cancer metastasis: Lung cancer originates in the lungs but often spreads to different body parts like the brain and the bones. Once cancer becomes metastatic, it becomes difficult to treat it.

Lung Cancer no longer just a Smoker’s Disease?

Smoking is the major cause of Lung Cancer but this is not the only factor which is taking your life away. There is an increased risk of the disease if you are an active smoker and also if you are exposed to second-hand smoke (passive smoker). But, lung cancer has been seen affecting those people who have never smoked in their lives.

Following are a few other risk factors that could lead to lung cancer:

  • Passive Smoking: Any exposure to a secondhand smoke is also as harmful as smoking.
  • Toxic Air & Air pollution: An exposure to radon gas, which is produced by the natural break down of uranium in the soil, water or rock and which ultimately mixes with the air that we breathe in, is also unsafe.
    • As per a report of the Indian Medical Association (IMA) released in November 2017, the air quality index of Delhi breached 999 which was equivalent to smoking 50 cigarettes a day. International Agency for Research on Cancer (IARC) which is a part of the World Health Organization has classified the outdoor pollution as carcinogenic.
  • Genetic Basis/Family History: People who have a family history of lung cancer are at an increased risk of developing the disease.
  • Compromised Immune System: People who have compromised immune system like those suffering from indications like HIV and people who are on long-term steroid treatments are also at risk of developing lung cancer.

There is no 100% guaranteed sure-fire way to prevent lung cancer, but there are a few ways in which you can reduce the risk.

  • Quit Smoking and avoid other tobacco-related products
  • Don’t Start Smoking
  • Avoid Passive Smoke
  • Avoid carcinogens
  • Eat a healthy & nutritious diet full of fruits and vegetables
  • Exercise regularly
  • Breathing exercises: deep inhalation and exhalation early mornings.

Globally, Lung Cancer accounts for nearly 1 in 5 cancer deaths. Once considered a man’s disease and a smoker’s disease it is now taking lives of women too. We need to follow a healthy lifestyle and be aware of the signs and symptoms of the disease.

Creating awareness, approaching the doctor at the right time and seeking diagnosis with appropriate treatment can help save lives. November is “Lung Cancer Awareness Month” and we @ Datt Mediproducts are spreading awareness.

Visit www.dattmedi.com for more infomation.
Share:
Recent Blogs
Ensuring Safe Wound Care Practices

Wound care is a critical aspect of healthcare that demands meticulous attention to patient safety. Proper wound management not only accelerates healing but also significantly reduces the risk of complications. In this blog, we will explore the importance of patient safety in wound care, emphasizing best practices, infection control, and risk minimization.

Importance of Patient Safety in Wound Care

Patient safety in wound care involves implementing measures to prevent harm and ensure safety during the treatment process. This includes avoiding infections, minimizing pain, and ensuring that wounds heal properly. A safe wound care environment is essential for patient well-being and can prevent further medical complications.

Best Practices in Wound Care

Assessment and Planning:

  • Thorough Assessment: Begin with a comprehensive assessment of the wound, considering factors like wound type, exudate characteristics, comorbid conditions, pain level, periwound condition, size, depth, and location. Understand the patient’s overall health, including any underlying conditions that may affect healing.
  • Individualized Care Plan: Develop a tailored care plan that addresses the specific needs of the patient and the wound. Regularly update the plan based on the wound’s progress.

Hygiene and Infection Control:

  • Clean Environment: Ensure the wound care area is clean and sanitized. All reusable wound care equipment and supplies should be sterilized before use. Fresh dressings and bandages should be cut with clean apparatus.
  • Hand Hygiene: Proper hand hygiene is crucial. Perform hand hygiene using alcohol-based rub or soap and water immediately before and after the wound care procedure. The use of gloves and other personal protective equipment (PPE) is mandatory to prevent contamination.

Wound Cleaning and Dressing:

  • Gentle Cleaning: Clean the wound gently with saline solution or appropriate antiseptic solutions. Avoid harsh scrubbing which can damage tissue and impede healing.
  • Appropriate Dressings: Use the right type of dressing for the wound such as hydrocolloid dressings for pressure ulcers or alginate dressings for heavily exuding wounds. Change dressings as per the doctor’s care plan to maintain a clean environment.

Patient Education and Involvement:

  • Educate Patients: Instruct patients and caregivers on proper wound care techniques, signs of infection, and when to seek medical advice. Patient education enhances compliance and promotes faster healing.

Infection Control:

Preventing infections is a cornerstone of safe wound care. Infections can complicate wound healing and lead to serious health issues. Implementing stringent infection control measures is essential.

  • Sterile Techniques: Always use sterile wound care equipment and supplies when handling wounds. This includes using sterile dressings, tools, and gloves.
  • Regular Monitoring: Monitor the wound for signs of infection, such as increased redness, swelling, warmth, or discharge. Early detection and intervention can prevent severe complications.
  • Antibiotic Use: Use antibiotics judiciously. Overuse or not finishing the full course of the antibiotic can lead to antibiotic resistance, making infections harder to treat.

Minimizing Risks:

Risk minimization in wound care involves anticipating potential problems and taking steps to avoid them.

  • Nutrition and Hydration: Ensure patients have adequate nutrition and hydration. A proper diet supports tissue repair and overall health.
  • Pressure Ulcer Prevention: For bedridden patients, repositioning is crucial to prevent pressure ulcers. Use pressure-relieving devices like specialized mattresses or cushions.
  • Moisture Control: Keep the wound environment moist but not wet. Moisture balance prevents the wound from drying out or becoming too wet, both of which can impede healing.

Ensuring safe wound care practices is vital for promoting patient recovery and preventing complications. By adhering to best practices, maintaining strict infection control, and actively involving patients in their care, healthcare professionals can create a safe and effective wound care environment. As we strive for excellence in wound care, let us remember that patient safety is at the heart of healing.

Adhering to international standards like ISO 9001:2015 and ISO 13485:2016 while manufacturing wound care products can further enhance the quality of wound care practices, ensuring that products meet rigorous safety and quality benchmarks. Let us commit to delivering next-gen healing solutions with a steadfast focus on safety and patient well-being.

Advantages of Using Velfix®࿯ T+Pad for Post Surgical Wounds

In the field of post-surgical wound care, innovation plays a crucial role in ensuring optimal healing outcomes and patient comfort. Introducing Velfix® -T+Pad, a groundbreaking solution that redefines the standards of wound dressings. Meticulously designed and crafted, Velfix® -T+Pad stands at the forefront of advanced wound care technology, offering not only healing but also unparalleled comfort and convenience.

Waterproof and Bacterial Barrier Properties:

Among the essential features of wound dressings, waterproofing and bacterial barrier stand out. Velfix® -T+Pad not only meets these requirements but surpasses them. Its impermeable yet breathable film forms a protective shield against water and bacteria, safeguarding the wound from external threats and fostering a hygienic healing environment.

Benefits of Continuous Visual Monitoring: 

The advantage of transparent film dressings is the ability to visually monitor the wound without removing the dressing. This allows healthcare providers to detect early signs of infection: clinicians can quickly spot signs of infection, excessive drainage, or other complications, facilitating prompt intervention. It also aids in exudate management : ensuring that the wound exudate is being effectively absorbed and does not pose a risk to the healing process.

Conforming to Body Contours:

Comfort is paramount, especially in areas prone to movement or swelling. Velfix® -T+Pad addresses this need adeptly. Its flexible design seamlessly conforms to the body’s contours, providing a snug fit without compromising comfort. Whether it’s a joint, a curve, or a crease, Velfix® -T+Pad stays in place, ensuring uninterrupted healing.

Effective Evaporation of Moisture:

Moisture management is critical for wound healing, and Velfix® -T+Pad excels in this aspect. Thanks to its innovative adhesive pattern, it facilitates efficient moisture evaporation from the wound bed. This not only keeps the area dry but also prevents maceration, creating optimal conditions for healing.

Reducing Pain Upon Removal:

Dressing changes can be painful, but Velfix® -T+Pad aims to alleviate this discomfort. Featuring a non-adherent pad, it minimizes trauma upon removal, reducing pain and discomfort for the patient. With Velfix® -T+Pad, dressing changes become a smoother, more tolerable process, enhancing the overall patient experience.

In the realm of post-surgical wound care, excellence is imperative. With its innovative design and advanced technology, Velfix® -T+Pad sets a new standard for wound dressings, offering a comprehensive solution that prioritizes healing, comfort, and convenience. 

From its waterproof and bacterial barrier properties to its transparent film for easy monitoring, Velfix® -T+Pad epitomizes cutting-edge wound care. Trust in Velfix® -T+Pad to deliver not only healing but also peace of mind, ensuring a smoother, swiffer path to recovery for patients worldwide.

×